navicon

13 22 54

Forklift Usage Tips: Load Lifting Checklist

Filed under: Forklift Operators - Safety & Guides

What’s so hard about lifting a load? Picking up a load may seem like a simple manoeuvre, yet if not done properly, injury and damage can occur. When dealing with forklifts; taking shortcuts will open you up to a large amount of risk that you are better off without. Below are some useful tips that should always be in the back of your mind when lifting a load on your forklift.

    FORKLIFT LOAD
  • Ensure that the load is within the rated capacity of the forklift (take into account the load centre as well as the mass). If unsure of the weight of the load check the consignment note or drivers manifest.
  • Ensure that the load is not top heavy, unstable, projecting or unequally lifting.
  • Ensure the pallet is evenly distributed. If not, re-stack the pallet prior to lifting.
  • If you must carry an unbalanced load, ensure that the heavy end is against the heel of the fork arms.
  • Check the condition of load supports (e.g. pallet, container). The sudden collapse of block stacking has often been caused by these items being damaged or deteriorated. If the load is sitting on a damaged pallet, remove the load and restack it on an undamaged pallet prior to lifting.
  • Bagged goods should be transported and stored on pallets. Bags should be cross stacked and stepped (pyramid shaped) above 1.5 meters.
  • When travelling with a large load that obscures your vision, travel in reverse or use another person to guide you
  • Always consider the ‘journey’s end’ of a load before picking it up. A convenient position of a load from pick up may not be convenient for stacking.
  • It is good practice not to attempt to lift or carry (at one time) more than one loaded pallet of any type, nor more than one unloaded container type pallet.
  • Use a load backrest extension when handling loads which are high or segmented.
  • Ensure the forks are spread sufficiently apart to ensure stability of the load and ensure that there is ample clearance beneath the load to insert the forks.

Special attachments can be used to lift irregular or unusual loads however, if using special attachments such as spreader bars, reach forks or raw clamps you must ensure:

  • You know the new capacity with attachment fitted.
  • The attachment has been fitted correctly.
  • You are aware of the manoeuvrability the forklift with the attachment.

If you have any other safety precautions or useful tips when lifting a load please leave them below for us and other readers to learn from.

Did you find this blog post useful?

Why not subscribe to our Blog? Don't forget to,
this article too so others can find it! Thanks for reading.

Next entry: Forklift Safety: Important Forklift Driver Tips - Always & Never

Previous entry: Forklift Daily Checklist; Pre-Operational And Operational Checklist

3 comments

Hi I am Hempel Schorn. Your blog is really Smart, helps greatly! Enjoy stay here.

runescape gold
May 12, 2012 - 8:19 pm

   
  hi im robert your blog is very helpful i did enjoy have a gud day ciao

masole
June 05, 2014 - 2:36 am

If you lift something without knowing the weight requirements, as tip one suggests you know, you could cause the forklift to tip or break. It’s like your body, if you lift too much you could break something. You should definitely learn the limits of the vehicle, as you should know the limits of yourself.

Guy Gardener
April 08, 2015 - 3:00 am

Leave a comment